383ci Small Block Chevy Blown Pro-Street Engine 600hp+ Built-To-Order Dyno Tuned

Description

*THIS ENGINE IS NOT DESIGNED FOR ANY TYPE OF RACING, TOWING, OR USE IN LARGE, HEAVY VEHICLES SUCH AS TRUCKS,  4X4's, MOTORHOMES, BOATS, ETC.
USE IN ANY OF THESE FORMS WILL VOID ALL WARRANTIES.
Hardcore Horsepower's "Blown Budget Street" engines are powerful, dyno-proven, daily-drivable and capable of producing boosted power on pump gas while looking and sounding ultra cool!
These one-of-a-kind engines are professionally-built and dyno-tuned small-block Chevy V8's running polished 6-71 superchargers, with dual supercharger-calibrated carbs on top.
This engine runs on pump gas, but we also offer various boost and power levels for all types of vehicles running all types of fuel. Plus, we include a detailed build sheet and dyno test results showing horsepower and torque with all engines we sell.
This engine is designed to be driven all week on pump gas and then cruised all weekend without any hassles. It is built for durability and continued power potential for years of driving enjoyment. It is not built for towing, marine, heavy off-road, or  continued race duty. On the outside it looks as good as it runs. If you’re looking for the ultimate small-block crate engine this is the one for you.
Special features of Hardcore Horsepower's Blown Budget Street engines:
• 600hp+ PEAK @ 6,200rpm (6.5psi boost)
• 550tq+ PEAK @ 4,700rpm
• 500tq+ from 3,400 to 6,200rpm
• All parts are BRAND NEW. NOTHING REMAN IN THIS ENGINE (Block Excluded)
• Smaller, lighter, and more powerful than most big-block crate motors!
• Street, off-road, marine, race, or show! This engine fits 'em all!
• RPM range: Idle-6,200+
• Runs on 91/93-octane unleaded pump gas
• Show and race quality build/finish
• Accepts standard-flange headers
• Be the first on your block to see how fast we can make you go!
Blown Budget Street 383 Specs-
All products listed below are included w/ purchase of this engine only; unless noted optional. All products listed are subject to availability and may be changed without notice.
Bore: 4.030"
Stroke: 3.750"
CID: 383"
(smaller/larger cid versions also available, prices will vary)
Compression ratio: 8.5:1+ (approx.)
Bearings: Hi-Perf Street
Block: Fully Blueprinted GM cast iron block w/ 4-bolt mains, stroker-clearanced, RH dipstick (USA passenger side), 1-pc RMS, painted your choice of color
Cam: Custom-ground hydraulic street blower grind, aggressive idle, fully degreed (full roller cam upgrade available for extra $$$)
Cam Drive: True double roller chain Made in the USA
Carburetors: Twin supercharger-calibrated double-pumpers side-mounted
Carb Linkage: Dual side-mount
Connecting Rods: Performance 4340-forged Steel I beam, 6.0", full-floating, w/ ARP capscrews
Crankshaft: Cast Steel, 3.75" stroke, 1-pc RMS, digitally-balanced,
double-keyed snout
Cylinder Heads: Aluminum, straight plugs (angle plugs also available)
Dampener: Degreed,
double-keyed
Distributor: MSD Billet aluminum, fully timed on dyno
Fasteners: GM & ARP
Gaskets: Fel-Pro and/or Mr. Gasket (MLS head gaskets)
Oil system: 7-qt. steel stroker pan, baffled, w/ kick-outs, RH dipstick (USA passenger side), Melling HV oil pump + welded pickup, H.D. oil pump driveshaft and ARP pump stud
*Note: Engine will be broken-in and dyno tested using proper break-in oil. Engine will be drained and shipped dry to your location with a new performance oil filter installed.
Pistons: Custom forged-aluminum low compression blower pistons
Pushrods: Steel, hardened
Rings: File-fit
Rockers: Full roller aluminum
Spark Plugs: NGK
Supercharger: 6-71 w/ 8mm drive; Polished finish (cast finish also available)
Timing cover: Chrome steel
Timing pointer: Degreed-in
Valves: 2.02/1.60 1-pc Stainless Steel
Valve covers: Polished aluminum standard (other covers available, prices may vary)
Weight: Engine 500-lbs. (as listed above); Shipping Wt. approx. 600-lbs.
OPTIONAL EQUIPMENT AVAILABLE FOR EXTRA $$$
Air filters/Scoops
Alternative fuels
Aluminum connecting rods
EFI
Exhaust system and Headers
Flexplate (Auto Trans) or Flywheel (Man Trans)
Fuel Lines, Pump, Filters, Fittings
Ignition box & coil
Nitrous Oxide Systems
Spark Plug wires & looms
Vacuum pump system
Water Pump, Alternator, A/C, Power Steering pump,
Exhaust system and Headers
Flexplate (Auto Trans) or Flywheel (Man Trans)
Fuel Lines, Pump, Filters, Fittings
Ignition System
Nitrous Oxide Systems
Spark Plug wires & looms
Vacuum pump system
Water Pump, Alternator, A/C, Power Steering pump, Starter, etc.
No-interest 12-month Layaway plan available
Terms: 20% down payment due at close of sale. The remaining balance will be divided into 12 monthly payments due thereafter until balance is paid in full. Item will be built and/or shipped after full payment has been received.
All Deposits and Layaway payments are non-refundable.
Each engine is custom-built to order and will take approximately 12-24+ weeks to build.
Details of full build and copies of all pertinent engine information will be provided to buyer only. This engine will include all parts listed above, except where noted. Some products shown in photos may not be included. Any/all products are subject to availability and may be changed without notice.
See Hardcore Horsepower eBay Store for Warranty Details.
We offer Worldwide Shipping on All Engines.
Please provide a complete street address for quote. We cannot quote to a ZIP code. Free shipping is only available to commercial addresses. Residential shipping is extra.
Feel free to call for more info or to customize your kit accordingly.
Photos shown may be representational only.
Actual item may differ.
Hardcore Horsepower, LLC
Franklin, TN
615/595-0060
10am-6pm Monday thru Friday
USA Central Time
Check out all of the other great deals available in our store!!!
We Make It Go Fast!!!
WARNING
Some of the products sold in this store contain/may contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. California Health and Safety Code Section 25249.6