-40%

383ci Small Block Chevy Street Engine 475hp+ Built-To-Order Dyno Tuned

$ 4065.57

Availability: 100 in stock
  • Country/Region of Manufacture: United States
  • Item must be returned within: 30 Days
  • Part Brand: Hardcore Horsepower
  • Block Type: V
  • Refund will be given as: Money back or replacement (buyer's choice)
  • Warranty: Yes
  • Manufacturer Part Number: Does Not Apply
  • Brand: Chevrolet
  • Fitment Type: Performance/Custom
  • Returns Accepted: Returns Accepted
  • Condition: New
  • Return shipping will be paid by: Buyer
  • Restocking Fee: No
  • Number of Valves: 16
  • Mounting Hardware Included: No
  • Number of Cylinders: 8

    Description

    Hardcore Horsepower has designed a complete, ready-to-run, 383ci Small Block Chevy engine that is perfect for budget street machine, hot rod, truck, or 4x4!!!
    There is no other complete, assembled, dyno-tested and tuned 383ci stroker engine on the market today that'll make this kind of power at this low price!!!
    *Note: This low-cost, budget engine is not designed for racing.
    To take the guesswork out of selecting the correct parts, we've designed this total engine package to offer you the most affordable way to make big torque and keep lots of cash in reserve. Search all you want. You'll never find a better truck engine deal than this!!!!
    Special features:
    475hp/480tq
    All parts are professionally machined, balanced, and blueprinted!
    Runs on 91/93-octane unleaded pump gas.
    Accepts standard-flange headers; 1-5/8" to 1-3/4” recommended.
    Daily-drivable.
    1-piece rear main seal for no oil leaks!
    Dyno tuned and proven!
    383ci engine components- ALL PARTS LISTED ARE BRAND NEW, excluding block
    Bearings: Racing rods and mains
    Block: GM 350 4-bolt; FULLY-MACHINED, w/ cam bearings, brass freeze plugs, and dowel pins installed! 1-pc RMS (stroker clearanced)
    Carb: Holley or Quick Fuel
    750-cfm vac-sec w/ electric choke
    Camshaft: Hydraulic Roller; custom stroker grind, radical idle, will not work with vacuum-assist power brakes, 2,500 min stall required
    Compression ratio: 10:1+
    Connecting rods: I-beam 4340-forged steel
    Crankshaft: Cast-steel 3.750” stroke, 1-pc RMS; FULLY INTERNALLY-BALANCED!
    Cylinder heads: Aluminum, 2.02/1.60 SS valves, straight plugs, fully assembled (angle plugs also available for extra $$$)
    Distributor: Hi-Perf bilet aluminum w/ cap and rotor
    Dampener: Internal Balance
    Flexplate/Flywheel: Not Included. Internal Balance Required. (available for extra $$$)
    Gasket set: Complete high performance
    Intake Manifold: Aluminum; Idle-6,200+rpm
    Oil system: 6-Qt steel pan, Melling pump + H.D. driveshaft & matching pickup, ARP pump stud, 1-pc Silicone pan gasket, oil filter adapter + locking fasteners
    Pistons: Hypereutectic alum flat-top
    Pushrods: Hardened steel 5/16” dia.
    Rings: Hi-Perf Moly
    Rocker arm stud set: 3/8"
    Rocker arms: Full roller aluminum, 1.6:1 ratio
    Spark plugs
    :
    Autolite Racing Iridium
    Spark plug wires:
    *Not included, optional for extra $$$
    Timing set: Double roller chain, 3-keyway
    Valve covers: Tall, Chrome or Black painted steel w/ baffles (polished alum valve covers shown are extra $$$)
    Valve diameter: 2.02" / 1.60”, stainless steel
    Valve locks: 11/32" 7-degree steel
    Valve seals: Viton rubber
    Valve spring retainers: 11/32" 7-degree steel
    Valve springs: Matched to cam
    OPTIONAL EQUIPMENT
    AVAILABLE
    FOR EXTRA $$$
    Alternative fuels
    Aluminum connecting rods
    Boost
    EFI
    Exhaust system/Headers
    Nitrous Oxide System
    Spark Plug wires & looms
    Vacuum pump system
    Water Pump, Alternator, A/C, Power Steering pump, etc.
    No-interest 12-month Layaway plan available
    Terms: 20% down payment due at close of sale. The remaining balance will be divided into 12 monthly payments due thereafter until balance is paid in full. Item will be built and/or shipped after full payment has been received.
    All Deposits and Layaway payments are non-refundable.
    Each engine is custom-built to order and will take approximately 12-24+ weeks to build.
    Details of full build and copies of all pertinent engine information will be provided to buyer only. This engine will include all parts listed above, except where noted. Some products shown in photos may not be included. Any/all products are subject to availability and may be changed without notice.
    See Hardcore Horsepower eBay Store for Warranty Details.
    We offer Worldwide Shipping on All Engines.
    Please provide a complete street address for quote. We cannot quote to a ZIP code. Free shipping is only available to commercial addresses. Residential shipping is extra.
    Feel free to call for more info or to customize your kit accordingly.
    Photos shown may be representational only.
    Actual item may differ.
    Hardcore Horsepower, LLC
    Franklin, TN
    615/595-0060
    10am-6pm Monday thru Friday
    USA Central Time
    Check out all of the other great deals available in our store!!!
    We Make It Go Fast!!!
    WARNING
    Some of the products sold in this store contain/may contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.
    California Health and Safety Code Section 25249.6