Spinning Shoe Rack | Revolving Lazy Susan Shoe Rack | Lazy Susan Shoe Organizer

Description

Our LAZY SHOE_SAN, French Carousel inspired shoe storage, shoe organization "fit any height space" unit is a total organization solution for showcasing your fashionable shoes in a time honored French tradition while keeping them stored, protected, storing up to 96 pairs of Shoes and/or Handbags to free up your valuable wall space. Sorry, cabinet not included.
The unit can used for shoes, handbags, or both. Each Tier has Six cubicles for your shoes. You can store up to two pairs of shoes per cubicle depending on the style and width of your shoes. Each cubicle will support two pair, size 10" women's shoe; up to 96 pair. We have the largest maximum capacity shoe storage solution on the market today, each Tier wood round is 28" in diameter (measured straight across) with a low profile 1/2" thick. Most competitive products like the Shoe_San are 24" in diameter and will not hold in many cases more than one pair of shoes, let alone two. Ours holds two pair per cubicle or 12 pair per tier. In addition we offer Free Shipping for a product that weighs close to 100lbs where most competitors charge for shipping.
Our Uniquely Designed Shoe Storage solution has two, 4 Tier Lazy Shoe_San's, both are 360 degree rotating circular platform Storage Racks for Women's Shoes uniquely constructed and engineered so one 4 Tier Shoe_San can be placed on on top of the other 4 tier Shoe_San, to achieve an 8 Tier Shoe_San. Each 4 Tier unit spins 360 degrees independent of the other as you can see from the image.
This is the largest capacity shoe storage unit on the market today.
* French Carousel Design, rotating shoe storage Lazy Shoe_San
* Constructed with high density All Natural Wood for durability
* Great solution to free up much needed closet space.
NOTE: The Cabinet is not included! This image was provided by a customer after installation of her cabinet and our Shoe_San in her new home.
Following are the Custom Designed dimensions as an example of a floor to ceiling height Shoe_San:
The following height specifications can be modified to fit your available space.
Tier cubicle heights:
Four Tier Bottom unit...
Tier 1:     14" for boots or large Handbags
Tier 2:      9" for tennis shoes
Tier 3:      9" for sandals
Tier 4:      9" for low heels
Four Tier Top unit...to be placed on top of the above Four Tier unit:
Tier 5:    10" for high heels
Tier 6:    10" for extra high heels
Tier 7:    10" for stilettos
Tier 8:    10" for stilettos
All the wood rounds in our Shoe_San's are a generous 28" in Diameter (measured straight across the round), and a very low profile 1/2" thick with fashionable trim edges.
The entire combined Shoe_San shoe storage structure with two 24" diameter wood turntables, (each turntable, 1 1/2" thick) will be a minimum height of 92" or approximately 7  feet 8" in height when combined as one unit placed on top of the other.  Leaves approximately 4 inches of Safety Space between the top of the completed structure and an 8 foot ceiling using customers available space specifications of approximately 8 foot or less from floor to ceiling. The top cannot be used for storage space.
We can adjust individual partition heights to match most floor to ceiling specifications, let us know the total height you need and will adjust partition height in the individual tiers to fit your space.
In addition, we provide a large Non-Skid safety pad to be added to the top of the bottom Shoe_San unit as an additional safety precaution when the upper unit is placed on top of the lower unit.
Customer can choose All Natural Wood (Stain/Paint Ready) or choose any Stain Colors at Check-out: If no selection, Antique White is the default color stain. You will still be able to still see the natural beauty of the wood grain after the stain application of your choice is applied. If you prefer another color, let us know and we will see if we can accommodate your choice. Note: Our Shoe_San's are stained, we are not a paint shop.
We use Pocket-Hole Joinery to construct the Shoe_San, this highly effective strong jointing technique, has its roots in ancient Egypt. Egyptians clamped two work-pieces together and bored a hole at an angle to create a extremely strong joint that in fact was instrumental in building the great pyramids.
We add the best precision ball bearing (silicon lubricated) on the market today. Our bearing mechanism delivers a superb quiet and smooth operation and is attached to two, 24" x 24" diameter, 1 1/2" thick wood round turntable platform for stability, balance, and ease of rotation, plus each of the metal anodized ball bearing turntable mechanisms are rated at 500 pounds weight capacity. Ball Bearing are Silicon lubricated to insure a silky smooth 360 degree turning capability for instant access to any shoe or handbag on the Shoe_San.
The Shoe_San is a FULLY FINISHED product, The customer can assemble ALL tiers by following our simple easy to follow assembly written instructions. The requirement is one Phillips Screwdriver, and 60 minutes to assemble both 4-Tier Shoe_San's, that's it!...Easy as Pie!
Customer may need assistance to place one 4 Tier unit on Top of the other to complete the installation of the entire Shoe_San or complete the lower unit, and build the upper unit one tier at a time on top of the completed lower unit.
This Shoe_San, can weigh over 100 pounds.  We use FedEx, Home Delivery exclusively to ship and deliver to the customers home. We also will need your contact telephone number for FedEx to contact you, if necessary, to deliver your Shoe_San on a timely basis.
Also, if your delivery address is any State on the West Coast a special .00 FedEx handling fee will be charged via a separate PayPal invoice sent to your email address. Your Shoe_San will be shipped in 2 to 3 working weeks.
Any questions, contact me via eBay before you purchase and I will contact you ASAP.
Handmade in the USA by Veterans, who are all Woodworking Artisans in North Wales, PA and Livingston, TX
"If we don't make it, we don't sell it"